3C电子行业外观缺陷检测方案-机器视觉

发布时间:

2023-02-10 11:24

  机器视觉检测在3C电子行业运用非常广泛,主要有表面缺陷检测、尺寸测量检测、镭雕字符检测、可变信息检测(一维码/二维码/字符)、配合机械手贴合定位等等。
  Machine vision detection is widely used in 3C electronics industry, mainly including surface defect detection, size measurement detection, radium carving character detection, variable information detection (one-dimensional code / two-dimensional code / character), fitting and positioning with manipulator, etc.

3C外观缺陷视觉检测


  检测功能:
  Detection function:
  表面外观缺陷检测:PCB板/柔性线路板/电容电器/手机外壳等等丝印缺陷检测,印刷缺陷检测,喷印外观缺陷检测,镭雕外观缺陷检测等等。
  Surface appearance defect detection: screen printing defect detection of PCB / flexible circuit board / capacitor / mobile phone shell, printing defect detection, spray printing appearance defect detection, radium carving appearance defect detection, etc.
  尺寸测量检测:电子芯片尺寸测量,PIN针高低及间距尺寸测量,电子辅件尺寸测量等等。
  Dimension measurement and detection: electronic chip dimension measurement, pin pin pin height and spacing dimension measurement, electronic accessories dimension measurement, etc.
  镭雕及喷印信息检测:可变一维码信息检测,可变二维码信息检测,生产日期缺失检测,生产批号缺失检测等等。
  Radium engraving and printing information detection: variable one-dimensional code information detection, variable two-dimensional code information detection, production date missing detection, production batch number missing detection, etc.
  贴合定位:配合机械手臂,机器视觉提取定位信息。
  Fitting and positioning: cooperate with the manipulator to extract the positioning information by machine vision.
  检测速度
  Detection speed
  速度不低于20000pcs/小时(检测不同的产品速度不同)
  The speed shall not be less than 20000 PCS / h (different products are tested at different speeds)
  不良处理
  Bad treatment
  声光报警/停机/打标/发出剔废信号等
  Audible and visual alarm / shutdown / marking / waste removal signal, etc
  设备优势
  Equipment advantages
  软件操作简单,快速建模,向导设置,直观的用户界面
  The software has the advantages of simple operation, fast modeling, wizard setting and intuitive user interface
  检测精度高,可针对不同区域设置不同的精度等级
  The detection accuracy is high, and different accuracy levels can be set for different areas
  检测误报率低
  Low detection false positive rate
  速度不低于20000pcs/小时(检测不同的产品速度不同)
  The speed shall not be less than 20000 PCS / h (different products are tested at different speeds)
  不良存档,检测到的缺陷及不良图片存档到制定文件夹,可供操作人员针对不良追溯。
  The defects are archived, and the detected defects and defective pictures are archived to the designated folder for the operator to trace the defects.
  如果您正在为产品合格率而发愁,人工检测达不到指定的标准,欢迎您致电咨询我们山东红宝自动化有限公司,我们会根据您所生产的产品特点,定制一套合适的机器视觉检测系统,实现产品零缺陷。
  If you are worried about the product qualification rate and the manual detection can not meet the specified standards, you are welcome to call Shandong Hongbao Automation Co., Ltd. we will customize a set of appropriate machine vision detection system according to the characteristics of your products to achieve zero defect.

机器视觉