自动化包装生产线机械设备常用的零部件有哪些?
发布时间:
2023-02-10 11:26
自动化包装生产线是针对企业用户在生产过程控制中的各种复杂控制要求,采用DCS和PLC等控制系统为企业量身定制,技术先进、可靠性高、经济实用的电气和自动化控制,生产,输送,包装、清洗系统等,其中常用的零部件主要有:
The automatic packaging production line is a kind of electrical and automatic control system with advanced technology, high reliability, economic and practical, production, transportation, packaging, cleaning system, etc., which is customized for the enterprise by using DCS, PLC and other control systems
指示灯:一般大多都是发光二极管,寿命长,氖泡和灯泡等寿命短,工作电压有交流电和直流电。
Indicator light: generally, most of them are light-emitting diodes, with long service life, neon bubble and bulb, etc., with short service life, AC and DC working voltage.
按钮就和急停开关:按钮常用于气动,暂定等控制键,还有些旋转类的按钮控制;急停按钮一般都是红色和黄色。
Button and emergency stop switch: buttons are usually used for pneumatic, temporary and other control keys, and some rotary buttons are used for control; emergency stop buttons are generally red and yellow.
熔断器:主要是保护电路,当电压和电流过大时,能够熔断保护电路。
Fuse: mainly protection circuit, when the voltage and current is too large, it can fuse the protection circuit.
转换开关和电源开关:控制按键。
Transfer switch and power switch: control key.
断路器:主要是恢复短路保护的,当电路和电器装置发生瞬间短路和瞬间大电流时,自动跳闸,保护后路的装置。
Circuit breaker: it is mainly used to restore short-circuit protection. When the circuit and electrical device have instantaneous short circuit and instantaneous high current, it will trip automatically and protect the back circuit.
交流接触器:主要用来控制主电路的设备的通断电的,一般电流较大.用触点来控制接通电源。
AC contactor: mainly used to control the main circuit of the equipment on and off, the general current is larger. Use contact to control the power supply.
中间继电器:和交流接触器的一样都是起保护电路的作用。
Intermediate relay: the same as the AC contactor is used to protect the circuit.
热继电器:是热感元件,主要用于设备温度过高的保护,自动短路保护后面的线路。
Thermal relay: it is a thermal element, which is mainly used for the protection of over high temperature and automatic short circuit protection of the circuit behind.
延时保护 器:一般分通电延时和断电延迟。
Time delay protector: generally divided into power on delay and power off delay.
刀开关:主要起人工断电控和控制,一般有2刀和三刀之分。
Knife switch: it is mainly controlled and controlled by manual breaking. It can be divided into 2 knives and 3 knives.
漏电开关:主要用于保护人身安全,有单相和三相漏电开关之分。
Leakage switch: mainly used to protect personal safety, there are single-phase and three-phase leakage switch.

每个零部件的采购都必须选择进行严格的筛选,只有保证零部件功能的稳定才能保证自动化包装生产线设备的正常运作。
The purchase of each part must be selected for strict screening. Only by ensuring the stability of the parts function can the normal operation of the automatic packaging production line equipment be ensured.
自动化包装生产线