手机官网

微信公众号

Copyright©山东红宝自动化有限公司 版权所有     网站地图XML      鲁ICP备16022612号-1       

关注我们

服务热线:

0531-8815 6666、8915 8888

红宝

非标自动化设备有哪些常用的零部件?

浏览量
  自动化产业进程的普及,工厂更需要非标自动化设备进行生产,因为非标自动化设备主要针对大批量定型产品的生产,设计合理的自动化生产流水线,辅以标准化的工装夹具和刀具,对生产过程中的全部产品线进行规模化的生产。
  With the popularization of the process of automation industry, factories need more non-standard automation equipment for production, because the non-standard automation equipment mainly aims at the production of large-scale finalized products, designs reasonable automatic production line, supplemented by standardized fixtures and tools, and carries out large-scale production of all product lines in the production process.
  面对市场的多元化改变,自动化流水线生产设备不得不及时进行调整,这就是非标自动化设备被广泛应用的关键所在。那么,在设计非标自动化设备的时候有哪些常用的零部件呢?让我们一一列举。
  In the face of diversified changes in the market, automatic production line production equipment has to be adjusted in time, which is the key to the wide application of non-standard automation equipment. So, in the design of non-standard automation equipment, what are the commonly used parts? Let's list them one by one.
非标自动化设备常用零部件
  指示灯:一般大多都是发光二极管,寿命长,氖泡和灯泡等寿命短,工作电压有交流电和直流电。
  Indicator light: generally, most of them are light-emitting diodes, with long service life, neon bubble and bulb, etc., with short service life, AC and DC working voltage.
  按钮就和急停开关:按钮常用于气动,暂定等控制键,还有些旋转类的按钮控制;急停按钮一般都是红色和黄色。
  Button and emergency stop switch: buttons are usually used for pneumatic, temporary and other control keys, and some rotary buttons are used for control; emergency stop buttons are generally red and yellow.
  熔断器:主要是保护电路,当电压和电流过大时,能够熔断保护电路。
  Fuse: mainly protection circuit, when the voltage and current is too large, it can fuse the protection circuit.
  转换开关和电源开关:控制按键。
  Transfer switch and power switch: control key.
  断路器:主要是恢复短路保护的,当电路和电器装置发生瞬间短路和瞬间大电流时,自动跳闸,保护后路的装置。
  Circuit breaker: it is mainly used to restore short-circuit protection. When the circuit and electrical device have instantaneous short circuit and instantaneous high current, it will trip automatically and protect the back circuit.
  交流接触器:主要用来控制主电路的设备的通断电的,一般电流较大。用触点来控制接通电源。
  AC contactor: mainly used to control the main circuit of the equipment on and off, the general current is larger. Use contacts to control power on.
  中间继电器:和交流接触器的一样都是起保护电路的作用。
  Intermediate relay: the same as the AC contactor is used to protect the circuit.
  热继电器:是热感元件,主要用于设备温度过高的保护,自动短路保护后面的线路。
  Thermal relay: it is a thermal element, which is mainly used for the protection of over high temperature and automatic short circuit protection of the circuit behind.
热继电器
  延时保护器:一般分通电延时和断电延迟。
  Time delay protector: generally divided into power on delay and power off delay.
  刀开关:主要起人工断电控和控制,一般有2刀和三刀之分。
  Knife switch: it is mainly controlled and controlled by manual breaking. It can be divided into 2 knives and 3 knives.
  漏电开关:主要用于保护人身安全,有单相和三相漏电开关之分。
  Leakage switch: mainly used to protect personal safety, there are single-phase and three-phase leakage switch.
  以上这些零部件都是非标自动化设备必不可少的零部件,主要的作用就是防止意外的发生,保护电路和操作人员的安全。
  These parts are essential parts of non-standard automation equipment, the main role is to prevent accidents, protect the safety of circuit and operators.