Mechanical equipment in the use of its need for regular maintenance, similar to the car running a certain mileage, but also to maintain the same truth. Automatic packaging equipment companies need to emphasize that not only regular maintenance of the equipment, but also preventive maintenance work.
Preventive maintenance mainly aims at the faults caused by common problems such as pipeline operation, and takes targeted maintenance measures; the later maintenance mainly takes targeted maintenance measures for the faults caused by unqualified.
In addition, the automatic packaging equipment will carry out a lot of operations according to the established procedures every day, which requires us to wash the press manipulator maintenance every day, weekly and monthly.
Use air compressor or air supply pipeline to check automatic packaging equipment. Clean and stable air source is the basis to ensure the stable operation of high-speed punch. When using high-speed punch, it is equipped with independent air compressor or air supply pipe for gas supply. Therefore, before using the punch, it is necessary to check the air compressor or air supply pipe:
Check the pressure regulator of air compressor. Confirm whether the pressure indicator of the pressure gauge is within the standard rated range.
Filtration check. Drain the filter before starting the loading and unloading manipulator.
Cylinder inspection. Drain the cylinder before starting the machine.
Check the pneumatic clutch brake. Manually check whether the solenoid valve of clutch brake exhausts normally.
In order to ensure the good operation of the automatic packaging equipment, monthly regular maintenance can be carried out according to the operation cycle of the equipment, including checking the balance cylinder, checking whether the lubrication and operation of the balance cylinder are normal, and regularly wiping the mirror surface of the stamping manipulator, so as to avoid affecting the normal sending and receiving of the beam.
Non professionals are not allowed to dismantle any parts of the automatic packaging equipment at will, so as to avoid damage to the stamping manipulator caused by some incorrect operation in the disassembly process.